AS SEEN IN 'REAL HOMES' MAGAZINE & THE SUNDAY TIMES
the table guy
WELCOME TO OUR ONLINE SHOP
Rustic Dining Table & 1 Bench
Desk Tops:Reclaimed scaffold boards
Rustic Dining Table.
Handmade in Outwood, Surrey by The Table Guy, this unique rustic dining table can be a narrow 3 scaffold boards measuring 670mm, 4 scaffold boards at 900mm, 5 scaffold boards at 1100mm wide or even a slightly modified 4 scaffold board version at 800mm.
The lengths vary from 1200mm to 3200mm long, all made from reclaimed wood, should you require a longer Rustic Dining Table please take a look at our Banqueting Tables.
This table does not have a central or end stretchers, please see our Rustic Refectory Tables if you prefer to have the runner and end stretchers
The frame is constructed from 75mm chunky square legs, reclaimed wood and builder’s off-cuts / extra's (where possible).
The rustic sturdy frame is sanded then applied with two coats of Farrow and Ball paint with a colour of your choice.
THE TABLE TOP:
Constructed from sections of used scaffold boards.
The boards benefit from repeated sanding that are then stained with Manns environmentally friendly, high quality, water-based wood stain for interior wood (with a colour of your choice). The top is then protected with Fiddes Hard wax oil, a premium hard wax oil for interior wood surfaces made from a blend of natural oil and waxes.
One long sturdy bench is included in the price. The bench will nestle under the table when not in use.
Measurements are 330mm Wide x 460mm High x inside measurement of your table minus 40mm.
This is a bespoke table, so the design can be modified to suit existing dining chairs so that they all fit between the legs of the table comfortably.
If you would prefer non-reclaimed wood, please ask before ordering
Confirm the length of your table. Consider any existing chairs and available space, choose the nearest length in the drop box, add exact length in the options field if different. To help you with deciding on lengths and widths of your rustic table we have a Design page that may answer some of your questions.
IMPORTANT: Decide if you require detachable legs or fixed (Please check your access)
Confirm the width of your dining table. We have four standard widths, 670mm (3 boards), 900mm (4 boards) wide & 1100mm (5 boards) wide and a modified width of 800mm where 4 scaffold boards are each trimmed by about 25mm.
Confirm table colour (frame). Farrow and Ball (Eggshell Estate) have a huge range of shades that can be viewed online and are stocked by most B & Q’s & Homebase stores.
Confirm table top stain. We mainly use Manns Natural Stain. If you require samples (recommended) Please list 3 to 4 preferred colours, samples will then be posted.
You can notify us of your colour and stain choices after placing an order, in which case, add TBC to colour and stain choices.
Larger dimensions are approximate +/- 20mm.
Each scaffold board has its own unique history therefore the wood stains may vary slightly, more so on the lighter stains.
Should you order a fixed leg table, please note that these legs can not be removed at a later date, so please check your access or if in doubt please consider ordering detachable legs.